Home

 

About Us

 

Gallery

 

Kit Pricing

 

Transmissions

 

Parts for Sale

 

Installation Instructions

 

Machining Services

 

Links

 

Street Rod 700R4 Transmissions

A $1895.00 Street Rod 700R4 transmission from Bendtsen's Transmission will have the following components installed if you have 400 HP or less.

  1. 8 Friction  3-4 clutch assembly (Z-pak)
  2. High Energy band
  3. 10 vane pump w/.500 boost valve
  4. New tall low roller clutch assembly
  5. 6 low-reverse frictions
  6. Beast sun shell
  7. New 29 element sprag
  8. New Torrington bearings
  9. New bushings
  10. Corvette servo and superior 4th piston
  11. Transgo shift kit & new accumulator pistons
  12. 2000 stall converter with furnace brazed turbine and impellor, all Torrington bearings, hardened turbine splines, H/D lockup clutch

Our $2850.00 Street Rod 700R4 transmissions ( no core required ) that are meant for 650 HP will have the following components.

  1. 8 Friction 3-4 clutch assembly w/Kolene steel plates (Z-pak)
  2. Wide High Energy band
  3. 10 vane pump w/hardened rings, new vanes, and .500 boost valve
  4. New tall low roller clutch
  5. 6 low-reverse frictions w/Kolene steels
  6. Sonnax sun shell kit
  7. New 29 element sprag
  8. New Torrington bearings
  9. New bushings
  10. Sonnax intermediate servo assembly and Super hold 4th piston
  11. Transgo shift kit or constant pressure valve body & new accumulator pistons
  12. New 5 pinion low planetary gearset / and new 5 pinion intermediate planetary gearset. These are brand new GM gearsets.
  13. Up to 2500 stall speed converter with furnace brazed turbine and impellor, all Torrington bearings, hardened turbine splines, H/D lockup clutch, flanged hub, billet front cover.  Other stall speeds available for extra cost.
  14. Worlds best lockup controller. 1 wire hookup with NO vacuum needed. Works perfect for modified vacuum (big camshaft).
  15. HD case with aluminum inspection cover available.
  16. Reinforced input drum
  17. Polished aluminum pan available
  18. Trans mount, Hayden trans oil cooler, detent cable, speedo gears and housing
  19. Dyno-tested.

300M steel input & output shafts, and special input drum available for an additional $1600.00

We carefully check band pin length, unit end play, and clutch clearances.

We can set the speedo drive gears to match your car's tire size and gear ratio.

Both transmissions have transmission mount, dipstick and tube, inspection cover, detent cable, and the worlds best Lockup Controller included.

Also available -

High performance Ford AOD, 2004R, 4L80E, 4L60E, E40D transmissions are custom built and we also sell TCI and Bauman stand alone controllers for these units.  All electronic transmissions are Dyno tested on our Axi-line transmission Dyno.

 

Bendtsen’s Speed Gems Inc.  763 767 4480

13603 Johnson St NE,  Ham Lake, MN. 55304

bob@transmissionadapters.com